The Force and Torque Measurement Checkweighing System is a portable system that measures the force and torque of a vehicle. It consists of a set of sensors, measuring points, and an electronic circuit board. The sensors measure forces in pounds, kilograms, and newtons; the measuring points can be placed on any surface of the vehicle; and the electronic circuit board records data from each sensor's position.
The system is designed to measure forces applied to the surface of a moving vehicle. The weight of any object that is not attached to the vehicle is considered to be zero (i.e., no force is being applied). When an object is attached to the vehicle, then its weight applies additional force on the vehicle's surface area. The greater its mass, the more force it applies on each square inch of its surroundings.
Highest Accuracy with Smallest Footprint
Space and cost savings are obtained with Vfinder''s integrated inspection solution, the combination checkweigher and metal detector system. In one system you can receive high accuracy weighing and metal detection. Cut waste and improve safety compliance within a small footprint while minimizing false rejects. Best performance in the food and pharmaceutical industries.
Product introduce
The system can separator metal scraps from potential products .
Metal detector and check weigher work integrated
The rejection system can accurate reject One machine have the metal impurity
The metal detector have high sensitivity and stability to avoid wrong alarm
Protection of consumers and brand reputation
Our advanced, proven multi-frequency systems guarantee reliable metal detection - even when processing difficult products - plus the precision-performing checkweigher also ensures full compliance with regulations and legal requirements. Your consumers can thus be sure of receiving contamination-free products.
Saving you space, time and money
VFINDER combination inspection solution is a compact system that fits perfectly into any production line. Only four feet are in contact with the ground, thereby guaranteeing improved floor accessibility for cleaning - a key quality feature in accordance with HACCP. The shared control console allows for product set-up parameters. Belt speeds and sorting equipment are automatically and jointly controlled, reducing manual workload by 50 per cent. The units comply with all necessary qualifications (DQ, IQ, OQ, PQ, MQ).
Metal detector general specification
| Detected products Height |
80 |
120 |
80 |
100 |
120 |
150 |
200 |
| Detected products Width |
300 |
300 |
400 |
400 |
400 |
400 |
400 |
| Belt Width |
250 |
250 |
350 |
350 |
350 |
350 |
350 |
| Belt length |
1500 |
Detector sensitivity |
Feф0.5 |
FeФ0.8 |
FeФ0.6 |
FeФ0.7 |
FeФ0.8 |
FeФ0.8 |
FeФ1.0 |
| SUSф1.0 |
SUSФ1.5 |
SUSФ1.0 |
SUSФ1.2 |
SUSФ1.5 |
SUSФ2.0 |
SUSФ2.3 |
| N-Feф0.8 |
N-FeФ1.0 |
N-FeФ0.8 |
N-FeФ1.0 |
N-FeФ1.2 |
N-FeФ1.5 |
N-FeФ1.5 |
| Speed of belt |
27M/min (can adjust 5-40 M/min) |
| Load ability |
20KG |
| Count |
100 |
| Reject Ways |
Sound and light alarm with belt stoped ;(when has auto-reject system ,belt continue and rejecting the goods ) |
| Application |
Non-package ,plastic package ,paper bag or box (non-metallic) product |
| Work Environment |
Temperature -10ºC-40ºC ,relative humility 30-90% |
High Performance Checkweighing for Manufacturers
A high performance checkweigher from Vikingdetector helps prevent underfilled or overfilled packages from reaching consumers. It also reduces product waste and rework time, provides completeness checks for package components and important production data for process improvements.
Comply with Industry Regulations and Local Weights and Measures
Dynamic checkweighers verify the weight of every product on the line, detecting and remove an underfilled product before it becomes a problem. In addition, the load cells that power our checkweighers are able to filter out environmental noise that could influence the weighing result, meaning a reduction in false rejects.
This helps to keep manufacturers in compliance with local weights and measures regulations as well as industry standards. More importantly, it helps to reduce production costs by reducing wasted product through the use of real-time feedback and automatic adjustment to filling equipment.
The optional Due Diligence Kits add further monitoring options, which make certain non-conforming or defective products are safely removed from the production line. To make rework easier to perform, the system can even sort products into different reject bins depending on the issue.
| Throughput |
Max180 ppm |
| Belt speed |
20-60m/min |
| Weighing Range |
≤200g |
| Suitable Product Dimension |
≤100mm(L)*100mm(W) |
| Weighting section |
250mm(L)*120mm(W) |
| Transport Height |
550 mm - 1,100 mm (± 50 mm)Customized |
| Industry |
Food; Other |
| Mini resolution |
0.01g(10mg) |
| Accuracy |
±0.05g(50mg)~±0.1g(100mg) |
| Production Environment |
Temperature: 0ºC~40ºC,Humidity:30%~95% |
| Operation language |
English /Spanish/Russian |
| Customization Options |
Bespoke handling; OEM |
| Approval |
Weights & measures design approval for official verification (MID certifiable) If needed |
| |
|
Suitable for
Audited Supplier 
){kind=link}